omega paints









Industrial Epoxy Paints

back to products
General Characteristics

OmegaEpoxyConcretePaint (series 12900)

Epoxy solvent based high abrasion and chemical resistant
OmegaEpoxyConcretePaint it is an epoxy solvent bearing 2-pack cold cured abrasion resistant and dust-proofing coatings, providing high quality protective floor and wall coatings with good mechanical strength and chemical resistance for exterior and interior applications in urban, marine and industrial polluted environments. The coating system partially penetrates through the concrete substrate and binds its particles, safe-guarding against crushing to fine dust, under the effect of abrading rolling loads. It also seals to protect from the deteriorating effects of chemicals, oils and greases, hydraulic fluids, coolants and motor oils, solvents, salts, cleaning detergents solutions and staining substances etc., they are non-toxic after drying non-yellowing and resist heat up to 120°C long term exposure to UV-rays reduces the gloss of paint.


OmegaEpoxyConcretePaint Solvent Free (series 11900)

High viscosity, self-levelling, glossy finish, up to 1.5mm per coat
OmegaEpoxyConcretePaint solvent free it is a fast curing 2-pack epoxy paint that will accept light traffic after 6 – 8 hours and normal traffic after 12 hours at 20°C. One high build coat is generally sufficient but it is recoatable after only 4 – 6 hours if required. In common with most epoxy resin coatings, full chemical and wear resistance is gradually achieved over 7 days. It also seals to protect from the deteriorating effects of chemicals, oils and greases, hydraulic fluids, coolants and motor oils, solvents, salts, cleaning detergents solutions and staining substances etc., they are non-toxic after drying non-yellowing and resist heat up to 120°C long term exposure to UV-rays reduces the gloss of paint.
  • A high build one coat system with excellent chemical resistance
  • Use in production areas, warehouses and other heavy wear areas


OmegaEpoxyConcretePrimer (series 12200)

Clear epoxy solvent based penetrating primer for concrete
OmegaEpoxyConcretePrimer it is a 2-pack transparent epoxy primer especially designed for use with high performance epoxy resin floor finishes such as OmegaEpoxyConcterePaint. The product has significant benefits in respect of penetration, binding power, rapid curing and surface finish.
  • Binds weak and friable surfaces
  • Ensures maximum long term adhesion of floor coating
  • Prime and coat in the same day, cutting labour costs and waiting time


OmegaEpoxyPutty (series 12100)

Heavy duty epoxy putty for floor & concrete patches
OmegaEpoxyPutty it is a 2-pack epoxy resin paste for filling small gaps, cracks and holes in concrete and masonry. It is quick and easy to use, with no odour, and is extremely strong once cured.
  • Ideal for repairing scratches, blemishes and bolt holes in floors or vertical surfaces
  • Easy to mix 50:50 ratio by weight or by volume
  • OmegaEpoxyPutty strength, will withstand very heavy traffic after curing overnight
  • Resistant to most industrial chemicals (after 4 days to achieve full hardness)

Can be used inside or outside, the finished repair can be painted with any OmegaEpoxy coating or it can be left as a wearing surface. OmegaEpoxyPutty is economical to use as you mix only as much as you need. It is solvent free and will not shrink as it cures. No primer is necessary and it can be used for repairs with a very fine edge (feather edging). It is extremely strong and its adhesive strength to clean concrete is greater than the strength of concrete itself.


OmegaEpoxyMetalPaint (series 14900)

Epoxy solvent based abrasion and chemical resistant for metals
OmegaEpoxyMetalPaint it is an epoxy solvent-bearing 2-pack coatings formulated to provide high quality protective coatings with good mechanical strength and chemical resistance, for exterior and interior applications in aggressive urban, marine and industrial polluted atmosphere and environments. OmegaEpoxyMetalPaint Coatings are characterized by excellent performance and protective. They are non-toxic after drying, non-yellowing and resist heat up to 120 °C. Do not contain lead, chrome or cadmium. Long exposure to UV rays reduces the gloss of paint and tends to chalk.


OmegaEpoxyZincRichMetalPrimer (series 14200)

Solvent base epoxy metal primer - zinc rich
OmegaEpoxyZincRichMetalPrimer is an anti-corrosive zinc-rich 2-pack epoxy primer. The key components are anti-corrosive pigment (finely divided zinc dust) and polyamide cured epoxy resin. OmegaEpoxyZincRichMetalPrimer provides exceptional corrosion resistance in harsh exposures by sacrificial methods. It is recommended for use over abrasive blast cleaned steel surfaces in most harsh environments, especially where over coating is required without special mist or seal coat techniques. OmegaEpoxyZincRichMetalPrimer offers ease of application; high film builds without mud-cracking and exceptional adhesion to field weld areas cleaned by power sanding or power wire brushing.


Follow us on: Facebook Youtube
join our mailing list
Copyrights Reserved Omega Paints © 2012